diff --git a/camera.py b/camera.py
deleted file mode 100644
index 694f59a..0000000
--- a/camera.py
+++ /dev/null
@@ -1,35 +0,0 @@
-import picamera
-import pyshine as ps # pip3 install pyshine==0.0.9
-HTML="""
-
-
-PyShine Live Streaming
-
-
-
- PyShine Live Streaming using OpenCV
-
-
-
-"""
-def main():
- StreamProps = ps.StreamProps
- StreamProps.set_Page(StreamProps,HTML)
- address = ('0.0.0.0',9000) # Enter your IP address
- StreamProps.set_Mode(StreamProps,'picamera')
- with picamera.PiCamera(resolution='640x480', framerate=30) as camera:
- output = ps.StreamOut()
- StreamProps.set_Output(StreamProps,output)
- camera.rotation = 90
- camera.start_recording(output, format='mjpeg')
- try:
- server = ps.Streamer(address, StreamProps)
- print('Camera serving started at','http://'+address[0]+':'+str(address[1]))
- server.serve_forever()
- finally:
- camera.stop_recording()
-
-
-if __name__=='__main__':
- main()
-
diff --git a/main.py b/main.py
deleted file mode 100644
index 2c3bd77..0000000
--- a/main.py
+++ /dev/null
@@ -1,80 +0,0 @@
-from flask import Flask, render_template, jsonify, redirect, abort, request
-import RPi.GPIO as gpio
-from time import sleep
-import subprocess
-import json
-import saver
-
-# Change this if you change the dir
-HOME_DIR = "/home/pi/PWSS/"
-
-# MQ-135 gas sensor
-def stinker():
- gpio.setmode(gpio.BCM)
- gpio.setup(4, gpio.IN)
-
- try:
- if gpio.input(4):
- return False
- else:
- return True
- sleep(2)
- except KeyboardInterrupt:
- pass
- finally:
- gpio.cleanup()
-
-# BME280 Humidity, Temperature, Pressure sensor
-def htp():
- string = subprocess.check_output([f"{HOME_DIR}/HTP"]).decode(encoding='UTF-8',errors='strict')
- string = string.split("temperature:")[1]
- temperature = string.split(" pressure:")[0].replace("*C", "C")
- string = string.split(" pressure:")[1]
- pressure = string.split(" humidity:")[0]
- humidity = string.split(" humidity:")[1].replace("\r\n", "")
- result = {
- "temperature":temperature.replace(" ", ""),
- "pressure":pressure.replace(" ", ""),
- "humidity":humidity.replace(" ", "")
- }
- # for i in string:
- # if i.isdigit():
- # result.append(i)
-
- return result
-# Flask server
-app = Flask(__name__)
-
-@app.route("/")
-def home():
- hpt = htp()
- stank = stinker()
- return render_template("index.html", HTP=hpt, stinker=stank)
-
-@app.route("/api/all")
-def all_data():
- with open(f"{HOME_DIR}/api/all.json","r") as f:
- data = json.load(f)
- return jsonify(data)
-
-
-@app.route("/api/daily")
-def daily_data():
- with open(f"{HOME_DIR}/api/daily.json","r") as f:
- data = json.load(f)
- return jsonify(data)
-
-
-@app.route("/api/save", methods = ['GET', 'POST'])
-def save_data():
- if request.method == "POST":
- print("will it save?")
- saver.manual()
- print("saved main")
- return redirect("/")
- else:
- return redirect("/api/all")
-
-
-if __name__=="__main__":
- app.run(host='0.0.0.0')
\ No newline at end of file
diff --git a/saver.py b/saver.py
deleted file mode 100644
index 6f25f79..0000000
--- a/saver.py
+++ /dev/null
@@ -1,35 +0,0 @@
-from main import stinker, htp, HOME_DIR
-from datetime import datetime
-import pytz, json
-
-tz = pytz.timezone('Europe/Sofia')
-
-
-def get():
- data = htp()
- data["air_pollution"] = stinker()
- data["time"] = datetime.now(tz).strftime("%H:%M:%S")
- return data
-
-def daily():
- data = get()
- with open("{HOME_DIR}/api/daily.json", "r+") as f:
- f_data = json.load(f)
- f_data[date] = data
- f.seek(0)
- json.dump(f_data, f, indent=4)
- f.close()
-
-
-def manual():
- data = get()
-
- with open(f"{HOME_DIR}/api/all.json", "r+") as f:
- f_data = json.load(f)
- f_data[f'{datetime.now(tz).strftime("%H:%M:%S")}&{datetime.now(tz).strftime("%x")}'] = data
- f.seek(0)
- json.dump(f_data, f, indent=4)
-
- print("Saved")
-
-
diff --git a/static/style.css b/static/style.css
deleted file mode 100644
index 8f8e147..0000000
--- a/static/style.css
+++ /dev/null
@@ -1,24 +0,0 @@
-@import url("https://fonts.googleapis.com/css?family=Ubuntu");
-
-body{
- height:100%;
- display:flex;
- align-items: center;
- justify-content: space-around;
- flex-direction: column;
- font-family:"Ubuntu";
-}
-
-#weather-data li{
- list-style: none;
-}
-
-#weather-data{
- font-size: xx-large;
- background-color: lightgray;
- padding-right: 25px;
-}
-
-#camera{
- padding: 20px;
-}
\ No newline at end of file
diff --git a/stats.py b/stats.py
deleted file mode 100644
index ce1cb63..0000000
--- a/stats.py
+++ /dev/null
@@ -1,130 +0,0 @@
-# Copyright (c) 2017 Adafruit Industries
-# Author: Tony DiCola & James DeVito
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-import time
-
-import Adafruit_GPIO.SPI as SPI
-import Adafruit_SSD1306
-
-from PIL import Image
-from PIL import ImageDraw
-from PIL import ImageFont
-
-import subprocess
-
-# Raspberry Pi pin configuration:
-RST = None # on the PiOLED this pin isnt used
-# Note the following are only used with SPI:
-DC = 23
-SPI_PORT = 0
-SPI_DEVICE = 0
-
-# Beaglebone Black pin configuration:
-# RST = 'P9_12'
-# Note the following are only used with SPI:
-# DC = 'P9_15'
-# SPI_PORT = 1
-# SPI_DEVICE = 0
-
-# 128x32 display with hardware I2C:
-disp = Adafruit_SSD1306.SSD1306_128_32(rst=RST)
-
-# 128x64 display with hardware I2C:
-# disp = Adafruit_SSD1306.SSD1306_128_64(rst=RST)
-
-# Note you can change the I2C address by passing an i2c_address parameter like:
-# disp = Adafruit_SSD1306.SSD1306_128_64(rst=RST, i2c_address=0x3C)
-
-# Alternatively you can specify an explicit I2C bus number, for example
-# with the 128x32 display you would use:
-# disp = Adafruit_SSD1306.SSD1306_128_32(rst=RST, i2c_bus=2)
-
-# 128x32 display with hardware SPI:
-# disp = Adafruit_SSD1306.SSD1306_128_32(rst=RST, dc=DC, spi=SPI.SpiDev(SPI_PORT, SPI_DEVICE, max_speed_hz=8000000))
-
-# 128x64 display with hardware SPI:
-# disp = Adafruit_SSD1306.SSD1306_128_64(rst=RST, dc=DC, spi=SPI.SpiDev(SPI_PORT, SPI_DEVICE, max_speed_hz=8000000))
-
-# Alternatively you can specify a software SPI implementation by providing
-# digital GPIO pin numbers for all the required display pins. For example
-# on a Raspberry Pi with the 128x32 display you might use:
-# disp = Adafruit_SSD1306.SSD1306_128_32(rst=RST, dc=DC, sclk=18, din=25, cs=22)
-
-# Initialize library.
-disp.begin()
-
-# Clear display.
-disp.clear()
-disp.display()
-
-# Create blank image for drawing.
-# Make sure to create image with mode '1' for 1-bit color.
-width = disp.width
-height = disp.height
-image = Image.new('1', (width, height))
-
-# Get drawing object to draw on image.
-draw = ImageDraw.Draw(image)
-
-# Draw a black filled box to clear the image.
-draw.rectangle((0,0,width,height), outline=0, fill=0)
-
-# Draw some shapes.
-# First define some constants to allow easy resizing of shapes.
-padding = -2
-top = padding
-bottom = height-padding
-# Move left to right keeping track of the current x position for drawing shapes.
-x = 0
-
-
-# Load default font.
-font = ImageFont.load_default()
-
-# Alternatively load a TTF font. Make sure the .ttf font file is in the same directory as the python script!
-# Some other nice fonts to try: http://www.dafont.com/bitmap.php
-# font = ImageFont.truetype('Minecraftia.ttf', 8)
-
-while True:
-
- # Draw a black filled box to clear the image.
- draw.rectangle((0,0,width,height), outline=0, fill=0)
-
- # Shell scripts for system monitoring from here : https://unix.stackexchange.com/questions/119126/command-to-display-memory-usage-disk-usage-and-cpu-load
- cmd = "hostname -I | cut -d\' \' -f1"
- IP = subprocess.check_output(cmd, shell = True )
- cmd = "top -bn1 | grep load | awk '{printf \"CPU Load: %.2f\", $(NF-2)}'"
- CPU = subprocess.check_output(cmd, shell = True )
- cmd = "free -m | awk 'NR==2{printf \"Mem: %s/%sMB %.2f%%\", $3,$2,$3*100/$2 }'"
- MemUsage = subprocess.check_output(cmd, shell = True )
- cmd = "df -h | awk '$NF==\"/\"{printf \"Disk: %d/%dGB %s\", $3,$2,$5}'"
- Disk = subprocess.check_output(cmd, shell = True )
-
- # Write two lines of text.
-
- draw.text((x, top), "IP: " + str(IP), font=font, fill=255)
- draw.text((x, top+8), str(CPU), font=font, fill=255)
- draw.text((x, top+16), str(MemUsage), font=font, fill=255)
- draw.text((x, top+25), str(Disk), font=font, fill=255)
-
- # Display image.
- disp.image(image)
- disp.display()
- time.sleep(.1)
diff --git a/stats_saver.py b/stats_saver.py
deleted file mode 100644
index 897d2c2..0000000
--- a/stats_saver.py
+++ /dev/null
@@ -1,35 +0,0 @@
-from main import stinker, htp
-from datetime import datetime
-import pytz, json
-
-tz = pytz.timezone('Europe/Sofia')
-date = datetime.now(tz).strftime("%x")
-specific_time = datetime.now(tz).strftime("%H:%M:%S")
-
-def get_data():
- data = htp()
- data["air_pollution"] = stinker()
- data["time"] = specific_time
- return data
-
-def daily_data():
- data = get_data()
- with open("api/daily.json", "r+") as f:
- f_data = json.load(f)
- f_data[date] = data
- f.seek(0)
- json.dump(f_data, f, indent=4)
- f.close()
-
-
-def manual_data():
- data = get_data()
- data["time"] = date
- with open("api/all.json", "r+") as f:
- f_data = json.load(f)
- f_data[specific_time] = data
- f.seek(0)
- json.dump(f_data, f, indent=4)
- f.close()
-
-manual_data()
\ No newline at end of file
diff --git a/templates/index.html b/templates/index.html
deleted file mode 100644
index cdb4658..0000000
--- a/templates/index.html
+++ /dev/null
@@ -1,24 +0,0 @@
-
-
-
-
-
-
-
- PWSS
-
-
- 
-
-
- - {{stinker}}
- {% for i in HTP.keys() %}
- - {{HTP[i]}}
- {% endfor %}
-
-
-