screen is working now, TODO fix wiring diagram

checklist.json

@@ -1,163 +0,0 @@
-[
-  {
-    "Артикул": "Зарядно за LiPo акумулаторни батерии",
-    "Модел": "XK1866 микро USB зарядно LiPo батерии",
-    "Кол-во": "1",
-    "Ед. цена": "6.90лв.",
-    "Сума": "6.90лв."
-  },
-  {
-    "Артикул": "Акумулатор 12V/9Ah VIPOW",
-    "Модел": "AKU 12/9AH VIPOW",
-    "Кол-во": "1",
-    "Ед. цена": "35.00лв.",
-    "Сума": "35.00лв."
-  },
-  {
-    "Артикул": "Вакуум помпа ZD192",
-    "Модел": "IN ZD192",
-    "Кол-во": "1",
-    "Ед. цена": "5.90лв.",
-    "Сума": "5.90лв."
-  },
-  {
-    "Артикул": "Step-up DC-DC адаптер",
-    "Модел": "TV K ADAP USB 5V-12V 1A 5.5*2.1MM",
-    "Кол-во": "1",
-    "Ед. цена": "12.90лв.",
-    "Сума": "12.90лв."
-  },
-  {
-    "Артикул": "Преход SMA M - BNC M",
-    "Модел": "F1027 SMA M-BNC M",
-    "Кол-во": "2",
-    "Ед. цена": "3.80лв.",
-    "Сума": "7.60лв."
-  },
-  {
-    "Артикул": "Преход SMA M - BNC Ж",
-    "Модел": "F1028 SMA M-BNC M",
-    "Кол-во": "2",
-    "Ед. цена": "3.80лв.",
-    "Сума": "7.60лв."
-  },
-  {
-    "Артикул": "Преход SMA Ж - SMA Ж",
-    "Модел": "F1025 SMA Ж-SMA Ж",
-    "Кол-во": "2",
-    "Ед. цена": "3.60лв.",
-    "Сума": "7.20лв."
-  },
-  {
-    "Артикул": "Пасивен балун комплект приемник/предавател QUICK",
-    "Модел": "OHR BALUN QUICK K-T",
-    "Кол-во": "1",
-    "Ед. цена": "9.50лв.",
-    "Сума": "9.50лв."
-  },
-  {
-    "Артикул": "Букса BNC-RG58-за кримпване",
-    "Модел": "F411 BNC 50 КРИМ RG58",
-    "Кол-во": "6",
-    "Ед. цена": "0.80лв.",
-    "Сума": "4.80лв."
-  },
-  {
-    "Артикул": "Букса SMA-RG58-No reverse",
-    "Модел": "F1020 SMA-RG58 NOREV",
-    "Кол-во": "2",
-    "Ед. цена": "3.90лв.",
-    "Сума": "7.80лв."
-  },
-  {
-    "Артикул": "Човка за поялник ZD C1-2",
-    "Модел": "IN CH ZD C1-2",
-    "Кол-во": "1",
-    "Ед. цена": "2.90лв.",
-    "Сума": "2.90лв."
-  },
-  {
-    "Артикул": "Човка за поялник PK353T",
-    "Модел": "IN CH PK353T",
-    "Кол-во": "1",
-    "Ед. цена": "3.90лв.",
-    "Сума": "3.90лв."
-  },
-  {
-    "Артикул": "Резистори 9W  - Резистори 9W: 1Ω",
-    "Модел": "R 9W",
-    "Кол-во": "5",
-    "Ед. цена": "0.65лв.",
-    "Сума": "3.25лв."
-  },
-  {
-    "Артикул": "Резистори 9W  - Резистори 9W: 0.1Ω",
-    "Модел": "R 9W",
-    "Кол-во": "5",
-    "Ед. цена": "0.65лв.",
-    "Сума": "3.25лв."
-  },
-  {
-    "Артикул": "Кондензатор полиестерен 100nF/250V MKT",
-    "Модел": "100N/250V MKP GER",
-    "Кол-во": "2",
-    "Ед. цена": "0.60лв.",
-    "Сума": "1.20лв."
-  },
-  {
-    "Артикул": "Кондензатор керамичен 1nF/100V X7R",
-    "Модел": "1N/100V X7R GERM",
-    "Кол-во": "8",
-    "Ед. цена": "0.13лв.",
-    "Сума": "1.04лв."
-  },
-  {
-    "Артикул": "Резистори 9W  - Резистори 9W: 10Ω",
-    "Модел": "R 9W",
-    "Кол-во": "5",
-    "Ед. цена": "0.65лв.",
-    "Сума": "3.25лв."
-  },
-  {
-    "Артикул": "Ферит 27х14,5х11мм",
-    "Модел": "POR T106-2",
-    "Кол-во": "1",
-    "Ед. цена": "3.86лв.",
-    "Сума": "3.86лв."
-  },
-  {
-    "Артикул": "Ферит мини 9,5 х 10,5 х 2мм",
-    "Модел": "FERIT MINI",
-    "Кол-во": "5",
-    "Ед. цена": "0.35лв.",
-    "Сума": "1.75лв."
-  },
-   {
-    "Артикул": "Ардуино 61 - Релеен модул с две релета",
-    "Модел": "ARDUINO61 RELAY MODULE 2*10A/250V",
-    "Кол-во": 1,
-    "Ед. цена": "5.95лв.",
-    "Сума": "5.95лв."
-  },
-  {
-    "Артикул": "Ардуино 64 - Контролен панел TM4638",
-    "Модел": "ARDUINO64 CONTROL PANEL TM4638",
-    "Кол-во": 1,
-    "Ед. цена": "9.90лв.",
-    "Сума": "9.90лв."
-  },
-  {
-    "Артикул": "Ардуино 40 - Енкодер",
-    "Модел": "ARDUINO40 ENCODER",
-    "Кол-во": 1,
-    "Ед. цена": "3.00лв.",
-    "Сума": "3.00лв."
-  },
-  {
-    "Артикул": "Копче за потенциометър KP3",
-    "Модел": "KP 3",
-    "Кол-во": 3,
-    "Ед. цена": "0.90лв.",
-    "Сума": "2.70лв."
-  }
-]

main.py

@@ -3,42 +3,137 @@ import pigpio
 import time
 import datetime
 import asyncio
-import os
+from RPi import GPIO
+from itertools import cycle
 
-PTT_IS_ON = False
+        
-modulations = {
+
-    "ssb":"./modulations/ssb.sh",
+bands = {
-    "fmrds":"./modulations/fmrds.sh"    
+    "80m":[3.5, 4],
+    "40m":[7, 7.3],
+    "20m":[14, 14.35],
+    "10m":[28, 29.7],
+    "2m":[144,146],
+    "70cm":[430,440]
 }
 
+# Setup for encoder
+band = cycle(bands)
+CURRENT_BAND:str = None
+
+
+def next_band():
+    global CURRENT_BAND
+    CURRENT_BAND = next(band)
+    FREQUENCY = bands[CURRENT_BAND][0]
+    print(FREQUENCY)
+    print(CURRENT_BAND)
+
+    return FREQUENCY
+
+def prev_band():
+    global CURRENT_BAND
+    CURRENT_BAND = list(bands.keys())[list(bands.keys()).index(CURRENT_BAND)-1]
+    print(CURRENT_BAND)
+    FREQUENCY = bands[CURRENT_BAND][0] + 1
+    return FREQUENCY
+
+FREQUENCY = next_band()
+clk=17
+dt=27
+sw=22
+GPIO.setmode(GPIO.BCM)
+GPIO.setup(clk, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
+
+clkLastState = GPIO.input(clk)
+
+
+async def rotary(clk=clk, dt=dt, sw=sw, step=0.025):
+    GPIO.setmode(GPIO.BCM)
+
+    GPIO.setup(clk, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
+    GPIO.setup(dt, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
+    GPIO.setup(sw, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
+
+    global FREQUENCY, clkLastState
+
+    try:
+        while True:
+            clkState = GPIO.input(clk)
+            dtState = GPIO.input(dt)
+            swState = GPIO.input(sw)
+            if swState == GPIO.HIGH:
+                print("yeet")
+            if clkState != clkLastState:
+                if FREQUENCY > bands[CURRENT_BAND][1]:
+                    FREQUENCY = next_band() 
+                    print(FREQUENCY)
+                if FREQUENCY < bands[CURRENT_BAND][0]:
+                    FREQUENCY = prev_band()
+                    print(FREQUENCY) 
+                if dtState != clkState:
+                    FREQUENCY += step
+                else:
+                    FREQUENCY -= step
+                    # print(round(FREQUENCY, 3))
+            clkLastState = clkState
+            await asyncio.sleep(.01)
+    except KeyboardInterrupt:
+        print("\nBye")
+    finally:
+        print("AAAAA")
+        GPIO.cleanup()
+
+
+# 1. Hook up the screen and buttons
+# * the screen should show the frequency we're at
+# * read the buttons
+# 2. Encoder [x]
+# * Change frequency in the scope of a given band
+PTT_IS_ON:bool = False
+modulations = cycle(["./modulations/ssb.sh", "./modulations/fmrds.sh"])
+
 
 # init GPIO
 pi = pigpio.pi()
 # button pin
 pi.set_mode(10, pigpio.INPUT)
+# modulation change pin(change this)
 
 async def run_command(*args):
     process = await asyncio.create_subprocess_exec(*args, stdout=asyncio.subprocess.PIPE, stderr=asyncio.subprocess.PIPE)
     print("Started: %s, pid=%s" % (args, process.pid), flush=True)
 
 
-async def button_press(gpio:int, level) -> bool:
+
+async def button_press(gpio:int, level):
+    #  TODO: light an LED
     global PTT_IS_ON
-    while True:
     if(pi.read(gpio)!=0):
         PTT_IS_ON = True
     if(pi.read(gpio)==0):
         PTT_IS_ON = False
-        await asyncio.sleep(.5)
+    await asyncio.sleep(.01)
 
-async def main(mod, freq:float):
+
-    asyncio.create_task(button_press(10, pigpio.EITHER_EDGE))
+# async def frequency(gpio):
-    global PTT_IS_ON
+#     # TODO write this function after hooking up the encoder
+
+async def main():
+    # TODO change after figuring out the logic
     task_created = False
+    asyncio.create_task(rotary())
     print("Ready")
+    cached_frequency = FREQUENCY
+    
     while True:
+        if FREQUENCY != cached_frequency:
+            cached_frequency = FREQUENCY
+            asyncio.create_task(run_command("./display", str(format(round(FREQUENCY,3), "7f"))))
+        await button_press(10, pigpio.EITHER_EDGE)
+
         if (PTT_IS_ON and not task_created):
-                asyncio.create_task(run_command(modulations[mod], str(freq)))
+                asyncio.create_task(run_command(next(modulations), str(FREQUENCY)))
                 task_created = True
         elif (task_created and not PTT_IS_ON):
             await asyncio.sleep(1)
@@ -46,8 +141,9 @@ async def main(mod, freq:float):
             task_created = False
         await asyncio.sleep(.5)
 
+
 if __name__ == "__main__":
     try:
-        asyncio.run(main("fmrds", 430))
+        asyncio.run(main())
     except KeyboardInterrupt:
         print("\n")

rotary.py

@@ -0,0 +1,64 @@
+from functools import wraps, partial
+from RPi import GPIO
+from time import sleep
+from itertools import cycle
+
+clkLastState = GPIO.input(clk)
+counter = next_band()
+        
+
+bands = {
+    "80m":[3.5, 4],
+    "40m":[7, 7.3],
+    "20m":[14, 14.35],
+    "10m":[28, 29.7],
+    "2m":[144,146],
+    "70cm":[430,440]
+}
+
+# Setup for encoder
+band = cycle(bands)
+CURRENT_BAND = None
+step = 0.025
+
+
+def next_band():
+    global CURRENT_BAND
+    CURRENT_BAND = next(band)
+    counter = bands[CURRENT_BAND][0]
+    print(counter)
+    print(CURRENT_BAND)
+
+    return counter
+
+def prev_band():
+    global CURRENT_BAND
+    CURRENT_BAND = list(bands.keys())[list(bands.keys()).index(CURRENT_BAND)-1]
+    print(CURRENT_BAND)
+    counter = bands[CURRENT_BAND][0] + 1
+    return counter
+
+async def main_loop(clk, dt, sw):
+    try:
+        clkState = GPIO.input(clk)
+        dtState = GPIO.input(dt)
+        swState = GPIO.input(sw)
+        if swState == GPIO.HIGH:
+            print("yeet")
+        if clkState != clkLastState:
+            if counter > bands[CURRENT_BAND][1]:
+                counter = next_band() 
+            if counter < bands[CURRENT_BAND][0]:
+                counter = prev_band() 
+            if dtState != clkState:
+                counter += step
+            else:
+                counter -= step
+                # print(round(counter, 3))
+        clkLastState = clkState
+        sleep(0.01)
+    except KeyboardInterrupt:
+        print("\nBye")
+    finally:
+        print("AAAAA")
+        GPIO.cleanup()

ssb.sh

@@ -1,4 +0,0 @@
-#!/bin/bash
-counter=1
-arecord -q -c1 -d 100 -t wav | csdr convert_i16_f \ | csdr fir_interpolate_cc 2 | csdr dsb_fc \ | csdr bandpass_fir_fft_cc 0.002 0.06 0.01 | csdr fastagc_ff \  | sudo sendiq -i /dev/stdin -s 96000 -f 430000000 -t float e6 -l
-